io.github.netchuu/tinkercad-circuits-mcp
NPM · TINKERCAD-CIRCUITS-MCP
Builds and simulates Arduino breadboard circuits in Tinkercad Circuits.
Available components
Last scanned (20 hours ago)
Scores higher than 39% of npm servers
Category IoT and Hardware
How this component scores in each security and reliability category. Every signal is checked automatically from public evidence about the published package, including repeated runs of it in an isolated sandbox, and we only credit what we can confirm. How we score → Why this is hard to score →
Supply Chain Security81
- No malware found by supply-chain analysis.Pass
- CVE check failed: a known high-severity CVE affects zod 3.25.76, a direct dependency. A fixed version is available. View diagnostics → Fail
- No install/post-install scripts declared.Pass
- 31 of 94 dependencies flagged as unhealthy. View diagnostics → Partial
Provenance & Transparency45
- Source repository is publicly reachable at the declared URL. View diagnostics → Pass
- Provenance check failed: no build-provenance attestation is published. See how to fix → View diagnostics → Fail
- Clear OSI-approved license (MIT).Pass
- Actively maintained (last published 14 days ago).Pass
- Disclosure check failed: no security disclosure policy was found in the source repository. See how to fix → Fail
Schema Quality & AI Usability69
- AI-judged instruction clarity (good).Pass
- Tool/resource definitions use about 784 tokens (~87/item across 9 items; 9 tools + 0 resources), lean.Pass
- Usage-examples check failed: none of the tools include examples. See how to fix → Fail
Stability & Change Management50
- Stability observed for 15 of 30 days with no destabilising changes; credit accrues until the full window elapses.Partial
Tool Coverage77
- 100% of tools have a non-trivial description (not blank, and not just the tool's name).Pass
- 32% of tool parameters carry a description.Partial
Tool Safety100
- No prompt-injection markers were found in the server instructions, tool names or descriptions we captured.Pass
- We read all 9 captured tool definition(s), and no name or description among them implies an irreversible operation.Pass
- An AI judge read all 9 captured unit(s) of tool text and found none that tries to manipulate the model reading it.Pass
Capabilities100
- Implements a supported MCP spec version (2025-11-25); the latest is 2026-07-28.Pass
Checks we ran (16)
- Malware scan
- Known CVEs
- Install scripts
- Dependency health
- Source repository
- Provenance
- License
- Maintenance
- Security disclosure
- Schema quality
- Stability
- Tool coverage
- Injection markers
- Destructive annotations
- Judged manipulation
- MCP protocol
Does not apply to this package (2)
- Endpoint SecurityScored on hosted endpoints only. A package has no live endpoint of its own for us to probe.
- Transport & ReachabilityScored on hosted endpoints only. A package has no live endpoint of its own for us to probe.
The score does not measure everything. What the score does not measure →
Every change we have recorded for this component, newest first. Security-relevant changes are always shown. ▲ marks a change for the better, ▼ a change for the worse; unmarked changes are neutral.
- 21 Nov 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 47 to 50. That category is still filling its 30-day observation window: 14 days of observed history at the previous scan, 15 at this one. The score rises as the window fills, whether or not the server changes.
- 19 Nov 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 40 to 43. That category is still filling its 30-day observation window: 12 days of observed history at the previous scan, 13 at this one. The score rises as the window fills, whether or not the server changes.
- 16 Nov 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 30 to 33. That category is still filling its 30-day observation window: 9 days of observed history at the previous scan, 10 at this one. The score rises as the window fills, whether or not the server changes.
- 14 Nov 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 23 to 27. That category is still filling its 30-day observation window: 7 days of observed history at the previous scan, 8 at this one. The score rises as the window fills, whether or not the server changes.
- 12 Nov 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 17 to 20. That category is still filling its 30-day observation window: 5 days of observed history at the previous scan, 6 at this one. The score rises as the window fills, whether or not the server changes.
- 10 Nov 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 10 to 13. That category is still filling its 30-day observation window: 3 days of observed history at the previous scan, 4 at this one. The score rises as the window fills, whether or not the server changes.
- 8 Nov 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 3 to 7. That category is still filling its 30-day observation window: 1 days of observed history at the previous scan, 2 at this one. The score rises as the window fills, whether or not the server changes.
- 6 Nov 26 62
First indexed and scored.
Diagnostic detail from the automated scan of this channel: what the scanner observed at each step, so you can see exactly where a check passed or failed. It is informational only and never changes the trust score.
Captured 21 Nov 2026 · Analysed npm/tinkercad-circuits-mcp@0.1.0
Provenance No attestation
The registry publishes no build provenance for this version, so there is nothing to verify.
| Result | No attestation |
|---|---|
| Ecosystem | npm |
Background: How many MCP packages publish verified provenance →
Vulnerabilities 1 finding
| ID | CVE | Severity | Vector | Fix available |
|---|---|---|---|---|
| GHSA-mrhx-c7xc-m3w5 | CVE-2023-54404 | high | CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H | yes |
Background: What a vulnerability scan can and cannot prove →
Dependencies 94 packages
| Packages resolved | 94 |
|---|---|
| Stale | 31 |
| Tree resolution | Complete |
Background: SBOMs and build attestations, explained →
The tools this component advertises to a client, with an estimated token cost for each. Expand a tool to see its parameters and schema. The per-tool counts are indicative and are not scored directly; the schema's total context footprint is one signal in Schema Quality & AI Usability. A tool's description is untrusted text the model reads on every call, which is what makes this list a security surface and not just an inventory: how tool poisoning works →
tinkercad_build_circuit Build a circuit ~223
Replaces everything in the open circuit with the one described here: an Arduino Uno, one small breadboard, the listed parts placed in breadboard holes, the wires and (optionally) the Arduino code. If no circuit is open, a new one is created. Holes are named like '12e' (columns 1-30, rows a-j; a-e and f-j are the two halves). Rails are T+, T-, B+, B- with an optional column (T-12). Wire ends are holes, rails, uno.PIN (uno.D13, uno.A0, uno.5V, uno.GND1) or ref.pin (led1.anode). `pin` says which leg of the part goes into `at`; the part is rotated until all legs land in holes. See docs/circuit-spec.md for examples.
| Name | Type | Req | Description |
|---|---|---|---|
| arduino | boolean | – | – |
| code | string | – | – |
| parts | array | – | – |
| title | string | – | – |
| wires | array | – | – |
No output schema declared.
No examples provided.
tinkercad_get_circuit Read the open circuit ~44
Returns the open circuit as Tinkercad has it saved: each part with the hole under every pin, its properties, every wire and the Arduino code.
Input schema present but exposes no named parameters.
No output schema declared.
No examples provided.
tinkercad_list_parts List parts ~67
Lists the parts that can go in a circuit spec, with their pin names, pin offsets (in breadboard holes, at angle 0) and settable properties. Filter with a word like 'led', 'motor' or 'sensor'.
| Name | Type | Req | Description |
|---|---|---|---|
| query | string | – | – |
No output schema declared.
No examples provided.
tinkercad_open_circuit Open or create a circuit ~86
Opens an existing Tinkercad Circuits design (link or id) in the editor, or creates a new one with target "new". Optionally renames it.
| Name | Type | Req | Description |
|---|---|---|---|
| target | string | yes | "new", a design link like https://www.tinkercad.com/things/abc123, or just the id |
| title | string | – | – |
No output schema declared.
No examples provided.
tinkercad_screenshot Screenshot ~27
Returns a PNG of the Tinkercad window as it is right now.
Input schema present but exposes no named parameters.
No output schema declared.
No examples provided.
tinkercad_set_code Set the Arduino code ~34
Replaces the Arduino sketch of the open circuit (text code, not blocks).
| Name | Type | Req | Description |
|---|---|---|---|
| code | string | yes | – |
No output schema declared.
No examples provided.
tinkercad_set_part Change a part setting ~89
Changes a setting on a part that is already in the circuit, e.g. a potentiometer position (0-1) or the distance an ultrasonic sensor sees. Use it between simulation runs to test different inputs.
| Name | Type | Req | Description |
|---|---|---|---|
| props | object | yes | friendly settings, e.g. {"position": 0.8} or {"distance_cm": 40} |
| ref | string | yes | – |
No output schema declared.
No examples provided.
tinkercad_simulate Run the simulation ~168
Starts the simulator, optionally presses buttons and types into the Serial Monitor, and samples LED brightness, servo angles and simulator time at the given moments (milliseconds after start). Returns the samples and the end of the Serial Monitor text. The simulator usually runs a bit slower than real time, so leave some margin and check sim_time.
| Name | Type | Req | Description |
|---|---|---|---|
| keep_running | boolean | – | – |
| leds | array | – | refs of LEDs to read |
| presses | array | – | – |
| samples_ms | array | yes | – |
| serial | boolean | – | return the Serial Monitor text |
| serial_input | array | – | – |
| servos | array | – | refs of servos to read |
| wait_for_serial | string | – | start the timeline only after this text is printed (e.g. READY) |
No output schema declared.
No examples provided.
tinkercad_status Check Tinkercad sign-in ~46
Opens the Tinkercad dashboard in the server's Chrome profile and reports whether you are signed in. If not, the user has to run `npm run login` once.
Input schema present but exposes no named parameters.
No output schema declared.
No examples provided.
How do I install the io.github.netchuu/tinkercad-circuits-mcp server?
io.github.netchuu/tinkercad-circuits-mcp runs locally as an npm package, launched with npx -y tinkercad-circuits-mcp. Ready-made configuration for Claude, Cursor, VS Code, Codex and 5 more is on this page, copied from each client's own documentation.
npm · tinkercad-circuits-mcp
claude mcp add netchuu-tinkercad-circuits-mcp -- npx -y tinkercad-circuits-mcp
What is the io.github.netchuu/tinkercad-circuits-mcp server?
io.github.netchuu/tinkercad-circuits-mcp is listed in the public MCP registry as io.github.netchuu/tinkercad-circuits-mcp. Builds and simulates Arduino breadboard circuits in Tinkercad Circuits. This page covers its npm package (tinkercad-circuits-mcp).
Is the io.github.netchuu/tinkercad-circuits-mcp server safe to use?
io.github.netchuu/tinkercad-circuits-mcp scores 69 out of 100 on VerifyMCP. We recorded 1 known advisory against it as of 21 November 2026. It declares no install or post-install scripts. That is a record of what we were able to check automatically, not an endorsement. The category breakdown on this page shows every signal behind the number, including the ones we could not confirm.
What tools does the io.github.netchuu/tinkercad-circuits-mcp server expose?
io.github.netchuu/tinkercad-circuits-mcp exposes 9 tools: tinkercad_status, tinkercad_list_parts, tinkercad_open_circuit, tinkercad_build_circuit, tinkercad_get_circuit, and 4 more. Their descriptions and schemas cost roughly 784 tokens of context every time the server is loaded.
Is the io.github.netchuu/tinkercad-circuits-mcp server still maintained?
io.github.netchuu/tinkercad-circuits-mcp is still listed as active in the MCP registry. We last reached this channel on 21 November 2026. Those dates come from our own scans of the registry and the channel itself, not from anything the publisher announced.
What licence is the io.github.netchuu/tinkercad-circuits-mcp server under?
io.github.netchuu/tinkercad-circuits-mcp declares the MIT licence, which is OSI-approved. That covers the source only, and says nothing about the cost of any service it calls.
What did VerifyMCP test on the io.github.netchuu/tinkercad-circuits-mcp server?
VerifyMCP ran 16 checks on io.github.netchuu/tinkercad-circuits-mcp, covering Malware scan, Known CVEs, Install scripts, Dependency health and 12 more. Endpoint Security and Transport & Reachability do not apply to an npm package, so they were not tested. The score does not measure everything, and the scoring documentation lists what it leaves out.