Skip to content
verify mcp Beta VerifyMCP is currently in beta. If you notice any issues, get in touch and we’ll put it right.

CircuitAgent

PYPI · CIRCUIT-AGENT-CLIENT

AI hardware synthesis: CircuitBlocks DSL, live LCSC parts, industrial DFX audit, stdio MCP server.

−15 this week 79 Trust /100

Last scanned (14 hours ago)

Scores higher than 75% of PyPI servers

Category IoT and Hardware

Trust breakdown (7 categories)

How this component scores in each security and reliability category. Every signal is checked automatically from public evidence about the published package, including repeated runs of it in an isolated sandbox, and we only credit what we can confirm. How we score → Why this is hard to score →

Supply Chain Security50
  • Malware scan not yet available for this package.Unverified
  • No known CVEs affecting this package version or its production dependencies.Pass
  • Runs setuptools.build_meta at install time, a recognised build step with no custom scripting around it. View diagnostics → Pass
  • No production dependencies, so there is no dependency health to assess. View diagnostics → Pass
Provenance & Transparency100
  • Source repository is publicly reachable at the declared URL. View diagnostics → Pass
  • Cryptographically verified build provenance (signed, bound to mo9652962-ai/circuit-agent). View diagnostics → Pass
  • Clear OSI-approved license (MIT).Pass
  • Actively maintained (last published 24 days ago).Pass
  • Publishes a security disclosure policy (SECURITY.md).Pass
Schema Quality & AI Usability76
  • 100% of prompts and resources have a non-trivial description (not blank, and not just the item's name).Pass
  • AI-judged instruction clarity (good).Pass
  • Context-footprint check failed: tool/resource definitions use about 16917 tokens (~183/item across 92 items; 84 tools + 8 resources), over budget; trim descriptions and params. See how to fix → Fail
  • Usage-examples check failed: none of the tools include examples. See how to fix → Fail
Stability & Change Management100
  • No destabilizing schema changes in the last 30 days.Pass
Tool Coverage100
  • 100% of tools have a non-trivial description (not blank, and not just the tool's name).Pass
  • 99% of tool parameters carry a description.Partial
  • Structured output schemas are declared (7% of tools); any adoption earns full credit.Pass
Tool Safety75
  • No prompt-injection markers were found in the server instructions, tool names or descriptions we captured.Pass
  • 0 of 5 tool(s) whose name or description implies an irreversible operation declare an MCP destructiveHint annotation; "audit_industrial_dfx" implies "execute" and declares readOnlyHint instead, contradicting what its own name says it does. See how to fix → Fail
  • An AI judge read all 86 captured unit(s) of tool text and found none that tries to manipulate the model reading it.Pass
Capabilities100
  • Implements a current MCP spec version (2026-07-28).Pass
What we tested

Checks we ran (15)

  • Known CVEs
  • Install scripts
  • Dependency health
  • Source repository
  • Provenance
  • License
  • Maintenance
  • Security disclosure
  • Schema quality
  • Stability
  • Tool coverage
  • Injection markers
  • Destructive annotations
  • Judged manipulation
  • MCP protocol

Checks we could not complete (1)

These are gaps on our side, not findings about this package. We only credit what we can confirm, so a category made up entirely of them scores 0.

  • Malware scan in Supply Chain SecurityMalware scan not yet available for this package.

Does not apply to this package (2)

  • Endpoint SecurityScored on hosted endpoints only. A package has no live endpoint of its own for us to probe.
  • Transport & ReachabilityScored on hosted endpoints only. A package has no live endpoint of its own for us to probe.

The score does not measure everything. What the score does not measure →

Changelog

Every change we have recorded for this component, newest first. Security-relevant changes are always shown. ▲ marks a change for the better, ▼ a change for the worse; unmarked changes are neutral.

  • 20 Nov 26 −15
    • Malware scan: pass → unverified ▼ security
  • 13 Nov 26 0
    • Stability: 0.97 → pass security
  • 12 Nov 26 +16
    • Malware scan: unverified → pass ▲ security
  • 11 Nov 26 −15
    • Malware scan: pass → unverified ▼ security
  • 10 Nov 26 +1

    No change was recorded against any check on this day. Stability & Change Management went from 87 to 90. That category is still filling its 30-day observation window: 26 days of observed history at the previous scan, 27 at this one. The score rises as the window fills, whether or not the server changes.

  • 9 Nov 26 −2
    • Stability: pass → 0.87 functional
  • 7 Nov 26 +15
    • Malware scan: unverified → pass ▲ security
  • 6 Nov 26 −15
    • Malware scan: pass → unverified ▼ security
Diagnostics

Diagnostic detail from the automated scan of this channel: what the scanner observed at each step, so you can see exactly where a check passed or failed. It is informational only and never changes the trust score.

Captured 21 Nov 2026 · Analysed pypi/circuit-agent-client@0.25.0

Provenance Verified

A signed build attestation was found and verified, binding this exact artifact to the source repository it claims to come from.

Result Verified
Ecosystem pypi
Reason Verified
Discovered via Registry attestation endpoint
Source repo mo9652962-ai/circuit-agent
Certificate issuer https://token.actions.githubusercontent.com
Certificate SAN https://github.com/mo9652962-ai/circuit-agent/.github/workflows/publish.yml@refs/tags/v0.25.0
Rekor log index 3535260483
Predicate type PyPI publish attestation https://docs.pypi.org/attestations/publish/v1
Subject digest sha256:97acb3d8a692d0e47dd1772bd9813c8bdd417fd92e66d71a5b68388a5d6157f7

Background: How many MCP packages publish verified provenance →

Install scripts 1 script
Hook Tier Command
build_backend Known build tool setuptools.build_meta

Background: Why install scripts are a supply-chain risk →

Dependencies 0 packages
Packages resolved 0
Tree resolution Complete

Background: SBOMs and build attestations, explained →

MCP tools · 84 exposed · ~16,455 tokens

The tools this component advertises to a client, with an estimated token cost for each. Expand a tool to see its parameters and schema. The per-tool counts are indicative and are not scored directly; the schema's total context footprint is one signal in Schema Quality & AI Usability. A tool's description is untrusted text the model reads on every call, which is what makes this list a security surface and not just an inventory: how tool poisoning works →

Tool Tokens
analyze_divider_tolerance ~347

Tolerance band of a resistor divider — nominal is not a specification. Reports BOTH the exact worst case (corner enumeration, valid because the transfer function is monotonic in each resistor) and the realistic statistical band (first-order sensitivity propagation, NOT naive RSS of percentage tolerances — the output is a quotient of random variables, so RSS-ing the percentages directly is invalid; TI SNVA112 states this explicitly). Includes TCR, sqrt-of-time life drift, supply tolerance, and matched-pair ratio tolerance, and names which resistor dominates the error budget so you fix the right part.

NameTypeReqDescription
delta_temp_cnumber–Temperature excursion from 25 °C that the design must hold accuracy over.
life_drift_pctnumber–Life drift percent over the datasheet's stated hours. Scales with sqrt of the time ratio.
r1_ohmnumberyesHigh-side resistor (input to midpoint), in ohms.
r2_ohmnumberyesLow-side resistor (midpoint to ground), in ohms.
ratio_tolerance_pctnumber–Ratio tolerance for a matched pair in one package. Replaces both absolute tolerances — the biggest free accuracy win.
tcr_ppm_per_cnumber–Temperature coefficient in ppm/°C. Thick film is ~200, thin film ~25, metal foil ~2.
tolerance_pctnumber–Resistor value tolerance in percent at 25 °C.
v_innumberyesInput voltage to the divider, in volts.
v_in_tolerance_pctnumber–Supply tolerance in percent, treated as an independent contribution.
NameTypeReqDescription
dominant_resistorstringyesWhich resistor contributes more error — fix this one first.
error_rss_pctnumberyesStatistical error band as a percentage of nominal.
error_worst_pctnumberyesWorst-case error as a percentage of nominal.
methodstringyesWhich methods were used, so the numbers are auditable.
notesarrayyesHuman-readable findings: which term dominates, what to change, and any caveat.
r1_ohmnumberyesHigh-side resistor.
r2_ohmnumberyesLow-side resistor.
sensitivity_r1numberyes∂V_out/∂R1, in volts per ohm.
sensitivity_r2numberyes∂V_out/∂R2, in volts per ohm.
v_innumberyesInput voltage to the divider.
v_out_maxnumberyesStatistical upper bound (sensitivity RSS).
v_out_minnumberyesStatistical lower bound (sensitivity RSS).
v_out_nominalnumberyesOutput at nominal resistor values.
v_out_worst_maxnumberyesExact worst-case upper bound (corner enumeration).
v_out_worst_minnumberyesExact worst-case lower bound (corner enumeration).

No examples provided.

analyze_enig_plating ~302

ENIG/ENEPIG plating thickness and black-pad (interfacial nickel corrosion) risk auditor per IPC-4552A and IPC-4556: verifies gold 0.05~0.20 μm, nickel 3.0~6.0 μm, phosphorus 7~10 wt%, and ENEPIG palladium 0.10~0.30 μm windows; scores galvanic black-pad susceptibility from phosphorus content, gold over-deposition, rework cycles, and process type, and flags gold >0.25 μm solder embrittlement.

NameTypeReqDescription
finish_typestring–Surface finish: 'enig' (default) or 'enepig'.
gold_thickness_umnumber–XRF immersion-gold thickness in μm (default: 0.08).
nickel_thickness_umnumber–XRF electroless-nickel thickness in μm (default: 4.0).
palladium_thickness_umnumber–ENEPIG palladium barrier thickness in μm (optional).
phosphorus_wt_pctnumber–Nickel deposit phosphorus content in wt% (default: 8.5).
rework_cyclesinteger–Number of prior soldering/rework thermal excursions (default: 0).
soldering_processstring–Assembly process: 'reflow' (default), 'wave', or 'hand'.

No output schema declared.

No examples provided.

analyze_impedance_tolerance ~246

Analyze PCB characteristic impedance manufacturing tolerance window and sensitivities per IPC-2141A and Polar SI9000 models: evaluates dielectric height (+-10%), trace width (+-10%), copper thickness (+-15%), and Er (+-5%) cumulative variations, calculating Zmin, Zmax, dZ/dW, dZ/dH, and yield within +-10% target.

NameTypeReqDescription
copper_thickness_mmnumber–Nominal copper thickness in mm (default: 0.035 for 1oz).
dielectric_ernumber–Substrate dielectric constant (default: 4.2 for FR-4).
dielectric_height_mmnumber–Nominal dielectric height in mm (default: 0.20).
height_tolerance_pctnumber–Dielectric height tolerance percentage (default: 10.0).
target_z0_ohmsnumber–Target characteristic impedance (default: 50.0).
trace_width_mmnumber–Nominal trace width in mm (default: 0.38).
width_tolerance_pctnumber–Trace width tolerance percentage (default: 10.0).

No output schema declared.

No examples provided.

analyze_ionic_contamination ~291

Post-clean ionic contamination (ROSE) and ion chromatography compliance analyzer per IPC-CH-65 and IPC-TM-650 2.3.25/2.3.28: compares NaCl-equivalent loading against class limits (1.56 μg/cm² standard, 1.20 Class 3), flags per-species halide carryover (chloride 0.70, bromide 0.54 μg/cm²), and scores dendrite/CAF risk from bias voltage and conductor pitch.

NameTypeReqDescription
bias_voltage_vnumber–Largest sustained DC bias between adjacent conductors (default: 5.0).
board_area_cm2number–Total extracted board area in cm² (default: 100.0).
min_conductor_gap_mmnumber–Smallest biased conductor spacing in mm (default: 0.20).
rose_measured_ug_cm2numberyesMeasured NaCl-equivalent loading from the ROSE tester in μg/cm².
species_ug_cm2object–Optional ion chromatography per-species results in μg/cm² (chloride, bromide, fluoride, nitrate, sulfate, weak_organic_acid).
target_classstring–IPC reliability class: 'Class 1', 'Class 2' (default), or 'Class 3'.

No output schema declared.

No examples provided.

analyze_power_tree ~104

Analyze system-level power distribution architecture, load current budgets (typical & peak mA), regulator dropout headroom, and LDO thermal dissipation / junction temperature estimates.

NameTypeReqDescription
ambient_temp_cnumber–Operating ambient temperature in °C (default: 25.0).
modulesobjectyesComponent modules dict (from synthesize_circuit output).
netlistobjectyesNetlist dict with 'connections' (from synthesize_circuit output).

No output schema declared.

No examples provided.

analyze_rc_filter_effective ~203

RC filter cutoff computed from the capacitance the part actually has, not the marked value. A 1 kHz filter built with a 10 µF X5R part that delivers 4 µF under bias cuts at 2.5 kHz — the nominal calculation is not wrong, it answers a different question. Returns nominal vs actual cutoff, the drift percentage, and the retention that caused it.

NameTypeReqDescription
ambient_cnumber–Operating ambient in °C.
applied_vnumberyesDC bias across the capacitor, in volts.
case_sizestring–EIA case code.
dielectricstring–EIA dielectric.
hours_in_servicenumber–Expected service life in hours.
marked_c_ufnumberyesMarked capacitance in µF.
r_ohmnumberyesSeries resistance in ohms.
rated_vnumberyesCapacitor rated DC voltage.
NameTypeReqDescription
actual_cutoff_hznumberyesCutoff computed from the capacitance the part really has.
confidencestringyesTrust level of the underlying capacitance figure.
drift_pctnumberyesPercentage the cutoff moved; positive means it went higher.
effective_capacitance_ufnumberyesEffective capacitance at operating conditions.
marked_capacitance_ufnumberyesMarked capacitance used.
nominal_cutoff_hznumberyesCutoff computed from the marked capacitance.
notesarrayyesHuman-readable findings: which term dominates, what to change, and any caveat.
resistance_ohmnumberyesSeries resistance used.
retention_fractionnumberyeseffective / marked.
tolerance_includedbooleanyesWhether part tolerance was folded in (default: no, to isolate bias drift).

No examples provided.

analyze_resistor_error_budget ~239

End-of-life resistance band for one resistor from the four-term error model: value tolerance, temperature coefficient, life drift, and (for matched networks) ratio tolerance. Reports both the RSS band and the linear worst-case band, and names the dominant term — because buying a ±0.1% thick-film part to fix an accuracy problem does nothing when its 200 ppm/°C TCR already contributes 1.2% over a 60 °C excursion. Life drift scales with sqrt of the time ratio (random walk, not a ramp).

NameTypeReqDescription
delta_temp_cnumber–Temperature excursion from 25 °C.
life_drift_pctnumber–Life drift percent over life_hours_specified.
life_hours_requirednumber–The service life the design must meet.
life_hours_specifiednumber–The hours the datasheet's life figure refers to.
nominal_ohmnumberyesMarked resistance in ohms.
tcr_ppm_per_cnumber–Temperature coefficient in ppm/°C.
tolerance_pctnumber–Value tolerance in percent.
NameTypeReqDescription
dominanceobjectyes–
value_bandobjectyes–

No examples provided.

assess_drop_shock_reliability ~238

JEDEC JESD22-B111 board-level drop shock assessor (1500 G / 0.5 ms half-sine, 30 drops): computes per-component inertial joint loads (F=ma), flags heavy components in board-corner high-strain flexure zones, estimates board natural frequency (border-ring stiffener aware), and prescribes underfill / center-migration / boss-fastening mitigations.

NameTypeReqDescription
board_height_mmnumber–PCB height in mm (default: 50.0).
board_mass_gnumber–Total assembled board mass in g (default: 60.0).
board_width_mmnumber–PCB width in mm (default: 80.0).
componentsarray–[{ref, mass_g, x_mm, y_mm, joint_count}] coordinates relative to board center.
has_border_ring_stiffenerboolean–True when a mid-frame/border ring anchors the board edge (default: False).
test_gnumber–Peak shock level in G (default: 1500 per JESD22-B111).

No output schema declared.

No examples provided.

audit_component_msl_floor_life ~206

Audit SMD plastic packages (BGA, QFN, CSP, TQFP) for moisture sensitivity level (MSL 1 to 6) and open-bag shop floor life per JEDEC J-STD-033D and IPC-M-109, flagging expired components and generating recommended dehumidification baking schedules (e.g. 125°C for 24h or 40°C for 192h) to prevent 260°C reflow popcorning defects.

NameTypeReqDescription
ambient_rh_pctnumber–Workshop ambient relative humidity percentage (default: 55.0).
ambient_temp_cnumber–Workshop ambient temperature in °C (default: 25.0).
exposed_hours_defaultnumber–Default shop floor exposure hours since unsealing moisture barrier bag (default: 48.0).
modulesobjectyesComponent modules dict with refDes, package, and optional msl_level or exposed_hours.

No output schema declared.

No examples provided.

audit_fab_capabilities ~265

Audit PCB layout physical design rules against real-world fab house capabilities (JLCPCB standard/advanced, PCBWay, OSH Park): verifies min trace width, min clearance, min via drill, annular ring, aspect ratio, and slot width against published fab process limits to prevent CAM engineering query (EQ) rejections.

NameTypeReqDescription
board_thickness_mmnumber–Nominal PCB thickness in mm (default: 1.600).
fab_idstring–Fab house identifier: 'jlcpcb_standard' (default), 'jlcpcb_advanced', 'pcbway_standard', 'oshpark_standard'.
min_slot_width_mmnumber–Smallest mechanical milled slot width in mm (default: 0.800).
min_trace_clearance_mmnumber–Smallest conductor-to-conductor gap in mm (default: 0.127).
min_trace_width_mmnumber–Smallest conductor trace width in mm (default: 0.127).
min_via_drill_mmnumber–Smallest via drill diameter in mm (default: 0.200).
min_via_pad_mmnumber–Smallest via outer pad diameter in mm (default: 0.450).

No output schema declared.

No examples provided.

audit_industrial_dfx ~109

Execute an enterprise-grade DFX (DFM/DFA/DFT/DFC/EMC) compliance audit on a schematic netlist. Verifies optical fiducials (MARK points), ICT testpoint coverage on power/debug rails, IEC 61000-4-2 TVS surge protection on exposed ports (USB, RS485, CAN), reverse polarity protection, and SMT costs.

NameTypeReqDescription
netlistobjectyesHardware netlist dictionary containing 'components' and 'connections'.

No output schema declared.

No examples provided.

audit_ipc6012_class_compliance ~350

Audit PCB physical and metallurgical design parameters against IPC-6012E and IPC-A-600J Class 1/2/3 acceptance criteria: evaluates external/internal annular rings, zero-breakout constraints for Class 3, PTH copper barrel plating thickness (avg >= 25μm for Class 3), etch conductor width reduction, and solder mask dam widths.

NameTypeReqDescription
avg_copper_barrel_umnumber–Average electroplated copper thickness in PTH barrels in μm (default: 22.0).
breakout_angle_degnumber–Observed breakout angle in degrees (default: 0.0).
conductor_width_reduction_pctnumber–Conductor width reduction percentage from etch defects (default: 5.0).
external_annular_ring_mmnumber–Smallest external annular ring width in mm (default: 0.125).
has_hole_breakoutboolean–Whether drill hole breakout from annular ring is observed (strictly 0° allowed in Class 3).
internal_annular_ring_mmnumber–Smallest internal annular ring width in mm (default: 0.100).
min_copper_barrel_umnumber–Minimum thin-point PTH copper plating thickness in μm (default: 19.0).
min_solder_mask_dam_mmnumber–Smallest solder mask dam width between adjacent exposed pads in mm (default: 0.090).
target_classstring–Target IPC reliability class: 'Class 1', 'Class 2' (default), or 'Class 3'.

No output schema declared.

No examples provided.

audit_smt_nozzle_selection ~315

EIA-481 & Juki/Yamaha/Fuji/Panasonic SMT pick-and-place nozzle selector & vacuum audit: verifies nozzle outer diameter (OD) clearances against tape pocket walls and component margins, inner diameter (ID) vacuum seal against leakage, and dynamic inertial hold safety factor (SF >= 1.5) under 3G~5G head acceleration to eliminate pick failure and fly-off.

NameTypeReqDescription
component_designatorstring–Component designator (default: 'U1').
component_height_mmnumber–Component height in mm.
component_length_mmnumber–Component length in mm.
component_mass_mgnumber–Component mass in milligrams.
component_width_mmnumber–Component width in mm.
friction_coefficientnumber–Surface friction coefficient (default: 0.30).
head_acceleration_gnumber–Head acceleration in G (default: 3.5).
package_typestring–Package designation (e.g. '0402', '0603', 'SOT-23', 'QFN-32').
specified_nozzle_modelstring–Optional explicit nozzle model (e.g. 'Juki-502', 'Yamaha-302A').
vacuum_pressure_kpanumber–Factory vacuum pressure in kPa (default: 70.0).
vendor_preferencestring–Vendor preference ('Juki', 'Yamaha', 'Fuji').

No output schema declared.

No examples provided.

audit_smt_tombstone_risk ~153

IPC-A-610G §8.3.2.9 / IPC-SM-782 SMT chip passive component thermal relief & tombstoning (Manhattan effect) risk auditor: checks thermal connection width symmetry between opposite pads on 0201/0402/0603/0805 passives, flagging direct solid plane connections without thermal relief spokes that create unbalanced wetting torque.

NameTypeReqDescription
componentsarray–List of passive component dicts ({ref, package, pad1_type, pad2_type, pad1_width_mm, pad2_width_mm}).
default_trace_width_mmnumber–Nominal signal trace width in mm (default: 0.20).

No output schema declared.

No examples provided.

audit_supply_chain ~64

Audit BOM component multi-sourcing resilience (ISO 9001 supply chain audit), identifying single-source bottlenecks and mapping pin-compatible second-source drop-in replacements with LCSC cross-references.

NameTypeReqDescription
modulesobjectyesComponent modules dict (from synthesize_circuit output).

No output schema declared.

No examples provided.

autoroute_pcb ~243

Execute automated native PCB layout and multi-layer track routing on circuit specifications. Generates standard Specctra SES (Session) routing data and comprehensive physical metrics (completion rate, total track length, via count, layer utilization) with zero JVM dependencies.

NameTypeReqDescription
board_height_mmnumber–PCB height in mm (default: 50.0).
board_width_mmnumber–PCB width in mm (default: 70.0).
clearance_mmnumber–Default routing clearance in mm (default: 0.100 / 4mil).
enginestring–Autorouting engine track. 'exact' (default) is orthogonal and DRC-verified; 'grid' is 8-connected and can leave diagonal shorts; 'room' uses continuous expansion rooms (may leave nets unrouted on den…
modulesobjectyesComponent modules dict (from synthesize_circuit output).
netlistobjectyesNetlist dict with 'connections' (from synthesize_circuit output).
trace_width_mmnumber–Default routing trace width in mm (default: 0.150 / 6mil).

No output schema declared.

No examples provided.

budget_fab_order ~297

JLCPCB / PCBWay headless order cost budget and submission manifest builder: offline math over public price ladders (layers, quantity, area, finish, SMT, shipping, lead priority), cross-vendor recommendation, and a SHA-256 tamper-evident manifest over the manufacturing artifacts for CI order staging — no network, no keys, stdlib-only (macOS laptop or Docker CI runner).

NameTypeReqDescription
artifactsobject–Manufacturing artifacts {filename: content} for the SHA-256 submission manifest.
board_h_mmnumber–Outline height mm (default: 50.0).
board_w_mmnumber–Outline width mm (default: 70.0).
include_smtboolean–Request PCBA assembly (default: False).
layersinteger–2 / 4 / 6 layers (default: 2).
lead_prioritystring–'economy' | 'standard' (default) | 'expedite'.
qtyinteger–Panel quantity: 5/10/30/100 ladder (default: 5).
shippingstring–'standard' (default) | 'dhl'.
smt_partsinteger–Number of SMT placements (default: 0).
surface_finishstring–'hasl_lead_free' (default) | 'enig' | 'osp'.

No output schema declared.

No examples provided.

calculate_bare_board_test_parameters ~243

Plan IPC-9252B bare-board electrical test recipes (flying probe or bed-of-nails universal grid): establishes continuity thresholds (signal <= 10Ω, power <= 2Ω) and isolation test voltages (Class 1: 50V, Class 2: 100V, Class 3: 250V), automatically derating test voltages to 100V on fine-pitch (<0.100mm) or sensitive RF nets to prevent dielectric breakdown arc-over damage.

NameTypeReqDescription
has_sensitive_rf_netsboolean–Whether board contains sensitive RF/microwave nets (default: False).
min_trace_clearance_mmnumber–Minimum conductor clearance on board in mm (default: 0.127).
netsarray–Optional list of net dicts ({name, min_clearance_mm, is_power, is_sensitive}).
target_classstring–IPC reliability class: 'Class 1', 'Class 2' (default), or 'Class 3'.
tester_typestring–Test equipment: 'flying_probe' (default) or 'universal_grid'.

No output schema declared.

No examples provided.

calculate_bga_escape_routing ~200

Calculate BGA diagonal dogbone via fanout geometry, escape channel trace widths and clearances, and minimum signal layer requirements per IPC-7095 Section 5.2.

NameTypeReqDescription
ball_countintegeryesTotal BGA ball count (e.g. 64, 100, 144, 256).
ball_pad_dia_mmnumber–BGA solder ball pad diameter in mm (default: 0.4).
ball_pitch_mmnumber–BGA ball center-to-center pitch in mm (default: 0.8).
trace_width_mmnumber–Escape routing neck-down trace width in mm (default: 0.10).
via_drill_mmnumber–Fanout via drill diameter in mm (default: 0.2).
via_pad_dia_mmnumber–Fanout via pad outer diameter in mm (default: 0.45).

No output schema declared.

No examples provided.

calculate_bom_cost ~96

Calculate PCBA component cost breakdown and estimate JLCPCB SMT manufacturing surcharges. Identifies Basic library parts (¥0 feeder fee) vs Extended library parts (+¥20/type feeder fee) and suggests cost optimizations.

NameTypeReqDescription
queriesarrayyesList of component names, models, or descriptions (e.g. ['STM32F103C8T6', 'SP3485', '0603 10k']).

No output schema declared.

No examples provided.

calculate_castellated_pad_geometry ~300

IPC-A-600J §2.9 / IPC-6012E §3.6.3 castellated hole (edge plating half-hole) manufacturability solver: verifies minimum finished hole diameter (>=0.80mm), centerline routing cut offset (|delta| <= 0.05mm), minimum inward pad extension (>=0.50mm), pitch (>=1.27mm), and barrel copper plating thickness (>=20μm) to prevent copper barrel tearout and burrs during daughterboard depaneling.

NameTypeReqDescription
center_to_edge_offset_mmnumber–Cutter path offset from hole center in mm (default: 0.00).
copper_plating_thickness_umnumber–Barrel copper plating thickness in μm (default: 25.0).
hole_drill_diameter_mmnumber–Finished drill diameter in mm (default: 1.00).
pad_inward_length_mmnumber–Inward annular pad extension from board edge in mm (default: 0.80).
pad_pitch_mmnumber–Center-to-center pitch between adjacent holes in mm (default: 2.00).
pad_width_mmnumber–Pad width along board perimeter in mm (default: 0.80).
solder_mask_clearance_mmnumber–Solder mask relief opening margin in mm (default: 0.080).

No output schema declared.

No examples provided.

calculate_copper_pour_current_drop ~281

Calculate DC IR-drop, Joule heating dissipation, and localized bottleneck current density in polygon copper pours and power busbars per IPC-2152 Section 5.0 and IEC 60092-352, verifying current density <= 35.0 A/mm² to prevent copper foil delamination or blistering under heavy loads.

NameTypeReqDescription
ambient_temp_cnumber–Ambient operating temperature in °C (default: 25.0).
bottleneck_width_mmnumber–Narrowest constriction neck width (e.g. around cutouts or anti-pads) in mm.
copper_weight_oznumber–Finished copper foil weight in oz (default: 1.0).
current_anumberyesContinuous DC load current in Amperes.
effective_length_mmnumber–Conduction path length from source to load in mm (default: 50.0).
effective_width_mmnumber–Average conduction width of the copper pour in mm (default: 20.0).
max_allowed_current_density_a_per_mm2number–Maximum safe current density ceiling in A/mm² (default: 35.0).
max_allowed_temp_rise_cnumber–Allowable conductor temperature rise ΔT in °C (default: 30.0).

No output schema declared.

No examples provided.

calculate_copper_thieving_balance ~201

Calculate layer copper density balance between top and bottom layers, assess reflow thermal bow/twist warpage risk (IPC-TM-650 2.4.22 <= 0.75%), and generate non-functional dummy copper thieving dot/grid patterns per IPC-2221B Section 10.1.1.

NameTypeReqDescription
board_height_mmnumberyesPCB height in mm (default: 50.0).
board_width_mmnumberyesPCB width in mm (default: 70.0).
bot_copper_area_mm2number–Optional bottom copper area in mm².
keepout_margin_mmnumber–Keepout margin from board edge in mm (default: 2.0).
pattern_pitch_mmnumber–Thieving dot pitch in mm (default: 2.54).
top_copper_area_mm2number–Optional top copper area in mm².

No output schema declared.

No examples provided.

calculate_creepage_isolation_slot ~240

Evaluate high-voltage electrical creepage compliance per IPC-2221B Table 6-1 and IEC 62368-1, and plan an air isolation milled slot (slot width, length, endpoints, and expanded effective creepage path) between high-voltage and low-voltage conductors when surface distance is insufficient.

NameTypeReqDescription
cond1_coordsarrayyesCoordinates [x, y] of first conductor.
cond2_coordsarrayyesCoordinates [x, y] of second conductor.
conductor_radius_mmnumber–Conductor/pad radius in mm (default: 1.0).
is_reinforced_insulationboolean–Whether reinforced insulation (2x clearance) is required per IEC 62368-1 (default: false).
slot_extension_mmnumber–Slot extension past conductor edges in mm (default: 2.0).
slot_width_mmnumber–Width of milled isolation slot in mm (default: 1.2).
voltage_vnumberyesOperating voltage difference between conductors (e.g. 220.0).

No output schema declared.

No examples provided.

calculate_differential_skew ~161

Solve high-speed differential pair intra-pair propagation delay skew (USB 2.0 HS ≤10ps, Ethernet ≤25ps, CAN-FD ≤50ps) and calculate required serpentine length matching tuning bumps count and geometry.

NameTypeReqDescription
dielectric_ernumber–Relative dielectric permittivity Er (default: 4.2).
height_mmnumber–Dielectric height to reference plane in mm (default: 0.100).
protocolstring–Target protocol standard (default: USB2_HS).
trace_length_delta_mmnumberyesMeasured trace length mismatch in mm (P minus N).
trace_width_mmnumber–Trace width in mm (default: 0.254).

No output schema declared.

No examples provided.

calculate_effective_capacitance ~445

Effective capacitance of a Class II MLCC at real operating conditions — the marked value is not the value in circuit. Multiplies the four loss mechanisms that compound: DC bias (the dominant one, typically 35-65% loss at rated voltage and worse in small cases), AC signal level, temperature coefficient, and logarithmic dielectric ageing, then applies the part tolerance. Returns the full factor stack so you can see which mechanism hurt most. Class I (C0G/NP0) parts correctly short-circuit to tolerance-only. Pass measured_retention_at_bias from a datasheet curve (Murata SimSurfing, TDK SEAT) to replace the band estimate and get confidence='measured'.

NameTypeReqDescription
ac_levelstring–Signal magnitude class: small_signal (<50 mVrms), moderate (50-500 mVrms), or large (>500 mVrms). Small signals see less capacitance.
ambient_cnumber–Operating ambient temperature in °C.
applied_vnumberyesDC bias actually across the part in this circuit, in volts.
case_sizestring–EIA case code: 0402, 0603, 0805, 1206 or 1210. Larger cases retain more capacitance under bias.
dielectricstring–EIA Class II dielectric: X5R, X7R, X8R, Y5V, Z5U, or Class I C0G/NP0.
hours_in_servicenumber–Expected service life in hours, used for the log-time ageing term.
marked_capacitance_ufnumberyesThe capacitance printed on the reel, in µF.
measured_retention_at_biasnumber–Retention fraction (0-1] read from the real datasheet DC-bias curve at applied_v. Replaces the band estimate.
rated_vnumberyesThe part's rated DC voltage.
tolerance_pctnumber–The part's capacitance tolerance in percent (e.g. 10 for ±10%). Applied at the pessimistic end.
NameTypeReqDescription
ac_level_factornumberyesRetention from AC signal magnitude (ferroelectric hysteresis).
ageing_factornumberyesRetention after the service life, log-time law.
ambient_cnumberyesOperating ambient used.
applied_vnumberyesDC bias across the part that was analysed.
case_sizestringyesEIA case code analysed.
confidencestringyesHow trustworthy the number is: 'measured' from a datasheet curve, 'band' from a published retention range, 'physical' for Class I parts where the loss is zero by physics.
dc_bias_factornumberyesRetention from DC bias alone — usually the dominant term.
dielectricstringyesEIA dielectric class analysed.
effective_capacitance_ufnumberyesThe capacitance the circuit actually gets.
hours_in_servicenumberyesService life used for the ageing term.
loss_pctnumberyesPercentage of the marked value that is lost.
marked_capacitance_ufnumberyesThe value printed on the reel.
notesarrayyesHuman-readable findings: which term dominates, what to change, and any caveat.
rated_vnumberyesThe part's rated DC voltage.
retention_fractionnumberyeseffective / marked, after every loss mechanism.
sourcestringyesThe measurements and standards the model is calibrated against.
temperature_factornumberyesRetention at the operating temperature, worst-case end of the TCC band.
tolerance_factornumberyesRetention at the pessimistic end of the part tolerance.

No examples provided.

calculate_fab_cost ~300

Estimate PCB fabrication cost from fab-house published tiered pricing: layers (2/4/6), quantity tiers (5/10/30/100), area surcharge beyond 100x100mm, solder mask color, surface finish (HASL/ENIG/OSP), board thickness, and lead time (normal/48h/24h). Estimate only.

NameTypeReqDescription
board_height_mmnumber–Board height in mm (default 100).
board_width_mmnumber–Board width in mm (default 100).
layersinteger–Layer count (2, 4, or 6; default 4).
lead_timestring–Lead time: normal (x1.0), fast_48h (x1.5), urgent_24h (x2.5).
quantityinteger–Board quantity (default 5).
solder_mask_colorstring–Solder mask color: green (free), red/yellow/blue (+25), black/white (+40), matte (+60).
surface_finishstring–Surface finish: hasl_lead (free), hasl_lead_free (+15), enig (+80), osp (free), silver (+45).
thickness_mmstring–Board thickness in mm: 0.6/0.8/1.0/1.2/1.6 (default)/2.0.

No output schema declared.

No examples provided.

calculate_fiducial_layout ~177

Generate asymmetric 3-point global optical fiducial layout (L-shape, 180° rotation unambiguous) and 2-point local fiducials for fine-pitch components per IPC-2221B Section 12 and JEDEC J-STD-020.

NameTypeReqDescription
board_height_mmnumberyesPCB height in mm.
board_width_mmnumberyesPCB width in mm.
edge_clearance_mmnumber–Fiducial center clearance from board edge in mm (default: 5.0).
fine_pitch_componentsarray–Fine-pitch components ({ref, pitch_mm, x_mm, y_mm, half_diagonal_mm}).
fine_pitch_threshold_mmnumber–Component pitch below which local fiducials are required (default: 0.5).

No output schema declared.

No examples provided.

calculate_high_speed_skin_depth_loss ~262

Calculate high-frequency skin effect depth, Hammerstad surface roughness correction factor (Ksr), and conductor attenuation per IPC-4562B and IPC-2141A for 1GHz to 50GHz signals (PCIe 5.0/6.0, USB4, 112G PAM4), recommending standard ED, VLP, or HVLP/RTF copper foil profiles to recover high-speed signal integrity eye margins.

NameTypeReqDescription
custom_rq_umnumber–Optional custom RMS roughness Rq in μm.
dielectric_ernumber–Substrate relative dielectric constant Er (default: 4.2).
foil_typestring–Copper profile: 'standard_ed', 'vlp' (default), or 'hvlp'.
frequency_ghznumber–Signal frequency in GHz (default: 10.0).
max_acceptable_ksrnumber–Maximum allowable roughness penalty factor (default: 1.85).
trace_thickness_mmnumber–Copper foil thickness in mm (default: 0.035 for 1oz).
trace_width_mmnumber–Conductor trace width in mm (default: 0.150).

No output schema declared.

No examples provided.

calculate_ict_testpoints ~179

Analyze PCB netlist testability, allocate automated bed-of-nails In-Circuit Test (ICT) testpoints (B.Cu Φ1.0mm), assign probe tip types (crown, spear, serrated), and verify fault coverage percentage per IPC-9252 & IPC-2221B.

NameTypeReqDescription
board_height_mmnumber–PCB height in mm (default: 50.0).
board_width_mmnumber–PCB width in mm (default: 70.0).
connectionsarrayyesNetlist connections list (from synthesize_circuit output).
min_pad_diameter_mmnumber–Testpad diameter in mm (default: 1.0).
min_probe_pitch_mmnumber–Minimum probe center-to-center pitch in mm (default: 2.0).

No output schema declared.

No examples provided.

calculate_ipc2152_trace_current ~206

Calculate conductor current-carrying capacity or solve required PCB trace width according to IPC-2152 standards for given copper weight (oz), temperature rise (ΔT °C), and layer position.

NameTypeReqDescription
copper_oznumber–Finished copper thickness in ounces (default: 1.0 oz = 35 um).
layerstring–Conductor layer position: 'external' (outer copper) or 'internal' (inner plane).
modestringyes'solve_current' calculates max Amps for given trace_width_mm; 'solve_width' calculates required mm for target_current_a.
target_current_anumber–Target continuous current in Amperes (required for 'solve_width').
temp_rise_cnumber–Allowable conductor temperature rise above ambient in °C (default: 20.0 °C).
trace_width_mmnumber–Trace width in mm (required for 'solve_current').

No output schema declared.

No examples provided.

calculate_ipc2221_clearance ~142

Calculate minimum electrical clearance (conductor spacing) according to IPC-2221B Table 6-1 based on peak voltage and conductor classification (B1 internal, B2 external uncoated, B4 coated, A6 leads).

NameTypeReqDescription
conductor_typestring–Conductor classification: B1 (internal), B2 (external uncoated), B4 (coated), A6 (leads). Default: B2.
peak_voltage_vnumberyesPeak working or test voltage in Volts (e.g., 5.0, 12.0, 24.0, 230.0).

No output schema declared.

No examples provided.

calculate_ipc7351_land_pattern ~258

Calculate mathematically compliant surface mount land pattern geometry (pad width X, pad length Y, pad center distance C, and courtyard boundary bounds) based on IPC-7351B standards across Density Levels A (Most), B (Nominal), and C (Least).

NameTypeReqDescription
densitystring–IPC-7351B Density Level: 'A' (Most/M), 'B' (Nominal/N, default), or 'C' (Least/L).
lead_contact_tnumber–Optional component lead contact length/band (mm).
lead_pitchnumber–Optional pin center-to-center pitch (mm) for multi-lead packages.
lead_typestring–Component lead style: 'chip', 'gullwing', 'no_lead' (QFN/DFN), or 'j_lead'.
lead_width_wnumber–Optional component lead width (mm).
overall_length_lnumber–Optional component overall tip-to-tip span (mm).
packagestringyesStandard footprint name (e.g. '0805', '0603', 'SOIC-8', 'QFN-32', 'TSSOP-14') or custom.

No output schema declared.

No examples provided.

calculate_parametric_circuit ~147

Solve discrete parametric circuit equations: optimal E96 resistor dividers, LDO thermal dissipation, I2C bus pullups, or RC filters.

NameTypeReqDescription
paramsobjectyesCalculation arguments: for 'resistor_divider' (v_in, v_out_target, max_quiescent_current_ma); for 'ldo_thermal' (v_in, v_out, i_load_a, package); for 'i2c_pullup' (v_cc, bus_capacitance_pf, mode); fo…
typestringyesType of parametric calculation to perform.

No output schema declared.

No examples provided.

calculate_pcb_bow_and_twist ~296

IPC-TM-650 2.4.22 / IPC-6012E §3.4.4 PCB bow and twist (warpage & flatness) analyzer: evaluates residual bimetallic thermal curvature driven by dielectric stackup core/prepreg asymmetry and copper density gradients, enforcing strict <=0.75% limit for SMT assemblies to prevent BGA Head-in-Pillow (HiP) open defects and tombstoning.

NameTypeReqDescription
board_length_mmnumber–Board longest edge in mm (default: 100.0).
board_thickness_mmnumber–Total PCB thickness in mm (default: 1.60).
board_width_mmnumber–Board shortest edge in mm (default: 80.0).
copper_balance_ratio_top_bottomnumber–Top-to-bottom copper volume ratio (default: 1.0).
dielectric_asymmetry_pctnumber–Dielectric core/prepreg thickness asymmetry % (default: 0.0).
has_smt_componentsboolean–Whether assembly contains SMT parts <=0.75% (default: True).
layer_countinteger–Total layer count (default: 4).
measured_bow_height_mmnumber–Optional measured dial-gauge bow deflection in mm.
measured_twist_height_mmnumber–Optional measured corner lift in mm.

No output schema declared.

No examples provided.

calculate_pcb_panel_rails ~286

Calculate SMT automated assembly panel frame with breakaway process rails, conveyor clamp clearances, SMEMA tooling holes (NPTH Φ3.2mm), optical fiducials (Φ1.0mm/Φ3.0mm mask), and de-paneling features (V-Cut score lines or perforated mouse-bites) per IPC-2221B Section 8.4 and IPC-SMEMA-9851.

NameTypeReqDescription
board_height_mmnumberyesSingle PCB outline height (mm).
board_spacing_mmnumber–Spacing between individual boards in mm (default: 0 for V-cut, 2.0 for mouse-bites).
board_width_mmnumberyesSingle PCB outline width (mm).
depaneling_methodstring–De-paneling method: 'v_cut' (default) or 'mouse_bites'.
grid_xinteger–Number of boards in X direction (default: 2).
grid_yinteger–Number of boards in Y direction (default: 2).
rail_sidesstring–Rail placement: 'left_right' (default), 'top_bottom', or 'all_four'.
rail_width_mmnumber–Conveyor clamping rail width in mm (default: 5.0, min: 3.0 per SMEMA).

No output schema declared.

No examples provided.

calculate_pcb_stackup_impedance ~124

Lookup standard industrial 4-layer (JLC04161H) and 6-layer (JLC06161H) PCB stackup matrices and solve target controlled impedance trace widths (50Ω RF, 90Ω USB, 100Ω Ethernet, 120Ω CAN/485, IPC-2141A).

NameTypeReqDescription
solve_custom_z_ohmsnumber–Optional custom single-ended target impedance in Ohms to solve required trace width.
stackup_idstring–Standard industrial stackup model (default: JLC04161H).

No output schema declared.

No examples provided.

calculate_press_fit_hole_compliance ~178

Evaluate automotive and industrial solderless press-fit compliant pin (eye-of-the-needle) finished hole diameter tolerances (standard 0.94mm ~ 1.09mm) and copper barrel plating thickness (>= 25μm) per IPC-9797 and IEC 60352-5, estimating insertion and retention forces to prevent inner-layer tear or vibration disconnects.

NameTypeReqDescription
min_copper_plating_umnumber–Minimum barrel copper plating thickness in μm (default: 25.0).
nominal_finished_dia_mmnumber–Nominal compliant pin hole diameter in mm (default: 1.00).
pinsarrayyesList of press-fit pin dicts ({pin_id, connector_ref, drill_dia_mm, copper_thickness_um, finished_dia_mm}).

No output schema declared.

No examples provided.

calculate_qfn_thermal_pad_stencil ~243

IPC-7093A / IPC-7525A QFN and BTC thermal slug window-pane stencil aperture solver: converts solid 100% paste openings into an optimized matrix grid (50%~70% paste coverage, default 60%) separated by 0.15~0.25mm bare copper web outgassing channels, preventing solder voiding (>35%), die floating, and perimeter bridging.

NameTypeReqDescription
has_unfilled_thermal_viasboolean–Whether open unfilled vias exist in the pad (default: False).
is_automotive_class3boolean–Whether strict Class 3 / automotive voiding limit <=15% applies (default: False).
pad_height_mmnumber–Thermal slug height in mm (default: 4.5).
pad_width_mmnumber–Thermal slug width in mm (default: 4.5).
target_coverage_pctnumber–Target paste coverage percentage 50~70% (default: 60.0).
web_width_mmnumber–Outgassing web channel width in mm (default: 0.20).

No output schema declared.

No examples provided.

calculate_serpentine_tuning_geometry ~188

Calculate high-speed differential pair serpentine delay tuning meander geometry, ensuring self-coupling suppression (S >= 3W, H >= 3W) and generating vertex paths per IPC-2141A Section 5.3.

NameTypeReqDescription
delta_length_mmnumberyesTarget added delay length in mm (e.g. 3.5).
end_x_mmnumber–End X coordinate in mm (default: 30.0).
end_y_mmnumber–End Y coordinate in mm (default: 20.0).
start_x_mmnumber–Start X coordinate in mm (default: 10.0).
start_y_mmnumber–Start Y coordinate in mm (default: 20.0).
trace_width_mmnumber–Trace width in mm (default: 0.15).

No output schema declared.

No examples provided.

calculate_smt_feeder_matrix ~83

Optimize SMT pick-and-place feeder slot allocation (8mm/12mm/16mm/24mm) and nozzle tooling selection (502/503/504/505/506) according to EIA-481 carrier tape standard and OpenPnP/Juki machine matrices.

NameTypeReqDescription
modulesobjectyesComponent modules dict (from synthesize_circuit output).

No output schema declared.

No examples provided.

calculate_smt_placement_clearance ~188

Analyze SMT pick-and-place nozzle collision clearance between tall (H >= 4.0mm) and low components, evaluate nozzle keepout envelopes (min 2.0mm horizontal gap), and generate layered placement priority sequences (lowest to tallest) per IPC-SM-782 and OpenPnP guidelines.

NameTypeReqDescription
board_height_mmnumber–Board height in mm (default: 50.0).
board_width_mmnumber–Board width in mm (default: 70.0).
min_clearance_envelope_mmnumber–Minimum required horizontal clearance between tall and low components (default: 2.0).
min_tall_component_height_mmnumber–Threshold height for tall components in mm (default: 4.0).
modulesobjectyesComponent modules dict (from synthesize_circuit output, with positions).

No output schema declared.

No examples provided.

calculate_solder_paste_volume ~157

Assess per-aperture deposited solder paste volume against target joint volume per IPC-7525A transfer analysis (accepted ratio window 1.0 ~ 2.5), flagging starved joints and excessive paste defects.

NameTypeReqDescription
aperturesarrayyesAperture list ({ref, shape: 'rect'|'circle', width_mm, length_mm}).
foil_thickness_umnumber–Stencil foil thickness in μm (default: 100).
target_standoff_mmnumber–Target solder standoff height in mm (default: 0.10).
transfer_efficiencynumber–Paste transfer efficiency η (default: 0.90; nano-coated laser-cut foil).

No output schema declared.

No examples provided.

calculate_stencil_aperture_ratios ~150

Evaluate SMT stencil aperture area ratio (>= 0.66 laser-cut) and aspect ratio (>= 1.5) compliance per IPC-7525 Stencil Design Guidelines, identifying paste-release-deficient apertures.

NameTypeReqDescription
aperturesarrayyesList of apertures ({ref, shape: 'rect'|'circle', width_mm, length_mm}).
foil_thickness_umnumber–Stencil foil thickness in μm (default: 100).
min_area_rationumber–Minimum acceptable area ratio (default: 0.66).
min_aspect_rationumber–Minimum acceptable aspect ratio (default: 1.5).

No output schema declared.

No examples provided.

calculate_teardrop_reinforcement ~151

Calculate tangent teardrop fillets for PCB vias, circular pads, and testpoints to prevent drill breakout, eliminate mechanical/thermal crack stress, and comply with IPC-2221B Section 9.1.5 and IPC-A-600J Class 3.

NameTypeReqDescription
default_trace_width_mmnumber–Default trace width in mm (default: 0.20).
teardrop_stylestring–Fillet geometry: 'curved' (default) or 'linear'.
viasarrayyesList of via objects ({'x_mm', 'y_mm', 'pad_dia_mm', 'drill_dia_mm', 'trace_angle_deg'}).

No output schema declared.

No examples provided.

calculate_trace_fusing_current ~277

IPC-2152 §5.3 & Onderdonk equation short-time transient conductor fusing current and burnout solver: computes adiabatic fusing current, time-to-melt, FR-4 resin delamination/blister threshold, and Joule action integral (I²t) for internal/external traces, verifying upstream fuse/PTC protection coordination margin (>=2.0x) against electrical fire.

NameTypeReqDescription
ambient_temp_cnumber–Initial ambient temperature in °C (default: 25.0).
copper_thickness_umnumber–Copper thickness in μm (default: 35.0 for 1oz).
fault_current_anumber–Estimated short-circuit fault current in Amperes (default: 15.0).
pulse_duration_snumber–Fault pulse duration in seconds (default: 0.10).
trace_layerstring–Layer type ('external' or 'internal') (default: 'external').
trace_width_mmnumber–Trace width in mm (default: 0.50).
upstream_fuse_i2t_a2snumber–Optional upstream fuse rated melting I²t in A²s.
upstream_fuse_rating_anumber–Optional upstream fuse rated current in Amperes.

No output schema declared.

No examples provided.

calculate_trace_impedance ~267

Calculate characteristic impedance (Z0) or differential impedance (Zdiff) for PCB microstrip traces using IPC-2141 / Wheeler equations. Solves exact trace width W and spacing S for target impedance (e.g. 50Ω RF, 90Ω USB, 120Ω RS485/CAN).

NameTypeReqDescription
dielectric_ernumber–Relative dielectric permittivity (Er) (default: 4.2 for FR4).
dielectric_h_mmnumber–Dielectric height between trace and reference ground plane in mm (default: 0.1mm for JLC04161H 4-layer).
modestringyesTrace mode: 'single' for single-ended microstrip, 'differential' for edge-coupled microstrip pair.
target_znumberyesTarget impedance in ohms (e.g. 50.0 for single-ended, 90.0 for USB differential, 120.0 for CAN/RS485).
trace_gap_mmnumber–Spacing between differential traces in mm (only used in differential mode, default: 0.15mm).
trace_thickness_mmnumber–Finished copper thickness in mm (default: 0.035mm for 1oz copper).

No output schema declared.

No examples provided.

calculate_via_protection_plan ~111

Select IPC-4761 via protection types (Type I ~ VII) per via assembly context: Type VII filled-and-capped (VIPPO) mandatory for BGA via-in-pad, Type V fill for thermal pads, Type IV tent+plug for BGA channels, Type II tent for free vias.

NameTypeReqDescription
viasarrayyesVia list ({id, in_pad, land_type: 'bga'|'thermal'|'signal', in_bga_pitch, vippo_filled}).

No output schema declared.

No examples provided.

Install

How do I install the CircuitAgent MCP server?

CircuitAgent runs locally as a PyPI package, launched with uvx circuit-agent-client. Ready-made configuration for Claude, Cursor, VS Code, Codex and 5 more is on this page, copied from each client's own documentation.

pypi · circuit-agent-client

# add to Claude Code
claude mcp add mo9652962-ai-circuit-agent-client -- uvx circuit-agent-client
Common questions

What is the CircuitAgent MCP server?

CircuitAgent is an MCP server listed in the public MCP registry as io.github.mo9652962-ai/circuit-agent-client. AI hardware synthesis: CircuitBlocks DSL, live LCSC parts, industrial DFX audit, stdio MCP server. This page covers its PyPI package (circuit-agent-client).

Is the CircuitAgent MCP server safe to use?

CircuitAgent scores 79 out of 100 on VerifyMCP. We found no known CVEs affecting it as of 21 November 2026. Its build provenance is signed and verified. That is a record of what we were able to check automatically, not an endorsement. The category breakdown on this page shows every signal behind the number, including the ones we could not confirm.

What tools does the CircuitAgent MCP server expose?

CircuitAgent exposes 84 tools: synthesize_circuit, list_supported_chips, register_custom_chip, search_lcsc_parts, list_circuit_blocks, and 79 more. Their descriptions and schemas cost roughly 16,455 tokens of context every time the server is loaded.

Is the CircuitAgent MCP server still maintained?

CircuitAgent is still listed as active in the MCP registry. We last reached this channel on 21 November 2026. Those dates come from our own scans of the registry and the channel itself, not from anything the publisher announced.

What licence is the CircuitAgent MCP server under?

CircuitAgent declares the MIT licence, which is OSI-approved. That covers the source only, and says nothing about the cost of any service it calls.

What did VerifyMCP test on the CircuitAgent MCP server?

VerifyMCP ran 15 checks on CircuitAgent, covering Known CVEs, Install scripts, Dependency health, Source repository and 11 more. One item could not be completed, a gap on our side rather than a finding about CircuitAgent: Malware scan. Endpoint Security and Transport & Reachability do not apply to a PyPI package, so they were not tested. The score does not measure everything, and the scoring documentation lists what it leaves out.