FERS — structural FEM
NPM · @FERSCLOUD/FERS-MCP · 2 COMPONENTS
Structural FEM for AI agents: frames, plates, buckling, seismic and Eurocode checks, solved locally.
Available components
Last scanned (16 hours ago)
Scores higher than 25% of npm servers
Category Developer Tools
How this component scores in each security and reliability category. Every signal is checked automatically from public evidence about the published package, including repeated runs of it in an isolated sandbox, and we only credit what we can confirm. How we score → Why this is hard to score →
Supply Chain Security100
- No malware found by supply-chain analysis.Pass
- No known CVEs affecting this package version or its production dependencies.Pass
- No install/post-install scripts declared.Pass
- 0 of 1 dependencies flagged as unhealthy. View diagnostics → Pass
Provenance & Transparency32
- Source repository is publicly reachable at the declared URL. View diagnostics → Pass
- Provenance check failed: no build-provenance attestation is published. See how to fix → View diagnostics → Fail
- Licence could not be checked: the licence is shipped as a file inside the package, not declared as a standard (SPDX) licence identifier, so we cannot tell whether it is OSI-approved.Unverified
- Actively maintained (last published 0 days ago).Pass
- Disclosure check failed: no security disclosure policy was found in the source repository. See how to fix → Fail
Schema Quality & AI Usability0
- Schema quality not yet verified: the captured schema was too large for us to store in full, or the server stopped listing its tools part-way, so we will not judge it on a partial copy.Unverified
Stability & Change Management50
- Stability observed for 15 of 30 days with no destabilising changes; credit accrues until the full window elapses.Partial
Tool Coverage0
- Tool coverage not yet verified: the captured tool definitions were too large for us to store in full, or the server stopped listing its tools part-way, so we will not judge them on a partial copy.Unverified
Tool Safety0
- Tool safety not yet verified: the captured tool definitions were too large for us to store in full (the trim removes the very descriptions this category reads), or the server stopped listing its tools part-way.Unverified
Capabilities100
- Implements a supported MCP spec version (2025-11-25); the latest is 2026-07-28.Pass
Unverified: 3 categories
Categories scored 0 because our sandbox has not given us the schema these checks need to read. That is a gap on our side rather than a finding about the package, and we only credit what we can confirm, so the score stands at 0 until the capture succeeds. We are working through the fleet, so this normally clears without any action from you. How we score packages →
Checks we ran (10)
- Malware scan
- Known CVEs
- Install scripts
- Dependency health
- Source repository
- Provenance
- Maintenance
- Security disclosure
- Stability
- MCP protocol
Checks we could not complete (4)
These are gaps on our side, not findings about this package. We only credit what we can confirm, so a category made up entirely of them scores 0.
- License in Provenance & TransparencyLicence could not be checked: the licence is shipped as a file inside the package, not declared as a standard (SPDX) licence identifier, so we cannot tell whether it is OSI-approved.
- Schema quality in Schema Quality & AI Usability (scores 0 for this)Schema quality not yet verified: the captured schema was too large for us to store in full, or the server stopped listing its tools part-way, so we will not judge it on a partial copy.
- Tool coverage in Tool Coverage (scores 0 for this)Tool coverage not yet verified: the captured tool definitions were too large for us to store in full, or the server stopped listing its tools part-way, so we will not judge them on a partial copy.
- Tool safety in Tool Safety (scores 0 for this)Tool safety not yet verified: the captured tool definitions were too large for us to store in full (the trim removes the very descriptions this category reads), or the server stopped listing its tools part-way.
Does not apply to this package (2)
- Endpoint SecurityScored on hosted endpoints only. A package has no live endpoint of its own for us to probe.
- Transport & ReachabilityScored on hosted endpoints only. A package has no live endpoint of its own for us to probe.
The score does not measure everything. What the score does not measure →
Every change we have recorded for this component, newest first. Security-relevant changes are always shown. ▲ marks a change for the better, ▼ a change for the worse; unmarked changes are neutral.
- 4 Nov 26 +16
- Malware scan: unverified → pass ▲ security
- Package version: 2.82.0 → 2.83.0 functional
- 3 Nov 26 0
- Malware scan: unverified → pass ▲ security
- Security disclosure: fail → unverified ▼ functional
- Package version: 2.80.0 → 2.82.0 functional
- 2 Nov 26 −15
- Malware scan: pass → unverified ▼ security
- Package version: 2.79.0 → 2.80.0 functional
- 1 Nov 26 +1
- Stability: 0.33 → unverified ▼ security
- Tool safety: Tool safety not yet verified: we do not have a sandbox capture of the tool definitions this version of the package serves yet. security
- Capabilities: pass → unverified ▼ functional
- Schema quality: Schema quality not yet verified: we do not have a sandbox capture of the MCP schema this version of the package serves yet. functional
- Tool coverage: Tool coverage not yet verified: we do not have a sandbox capture of the tool definitions this version of the package serves yet. functional
- Package version: 2.77.0 → 2.79.0 functional
- 31 Oct 26 0
- Security disclosure: unverified → fail ▼ functional
- 30 Oct 26 +1
- Security disclosure: fail → unverified ▼ functional
- Package version: 2.76.0 → 2.77.0 functional
- 28 Oct 26 +16
- Malware scan: unverified → pass ▲ security
- 27 Oct 26 −12
- Malware scan: pass → unverified ▼ security
- Stability: unverified → 0.20 ▲ functional
- Package version: 2.1.0 → 2.76.0 functional
Diagnostic detail from the automated scan of this channel: what the scanner observed at each step, so you can see exactly where a check passed or failed. It is informational only and never changes the trust score.
Captured 5 Nov 2026 · Analysed npm/@ferscloud/fers-mcp@2.83.0
Provenance No attestation
The registry publishes no build provenance for this version, so there is nothing to verify.
| Result | No attestation |
|---|---|
| Ecosystem | npm |
Background: How many MCP packages publish verified provenance →
Dependencies 1 package
| Packages resolved | 1 |
|---|---|
| Tree resolution | Complete |
Background: SBOMs and build attestations, explained →
The tools this component advertises to a client, with an estimated token cost for each. Expand a tool to see its parameters and schema. The per-tool counts are indicative and are not scored directly; the schema's total context footprint is one signal in Schema Quality & AI Usability. A tool's description is untrusted text the model reads on every call, which is what makes this list a security surface and not just an inventory: how tool poisoning works →
add_imperfection_case ~508
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| height_direction_x | number | – | – |
| height_direction_y | number | – | – |
| height_direction_z | number | – | – |
| load_combination_ids | string | yes | – |
| model | string | – | – |
| model_ref | string | – | – |
| sway_axis_x | number | – | – |
| sway_axis_y | number | – | – |
| sway_axis_z | number | – | – |
| sway_magnitude_rad | number | – | – |
| sway_ratio_denominator | number | – | – |
| translation_axis_x | number | – | – |
| translation_axis_y | number | – | – |
| translation_axis_z | number | – | – |
| translation_magnitude | number | – | – |
| translation_memberset_ids | string | – | – |
No output schema declared.
No examples provided.
add_load ~924
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| axes | string | – | – |
| direction_x | number | – | – |
| direction_y | number | – | – |
| direction_z | number | – | – |
| distribution_dx | number | – | – |
| distribution_dy | number | – | – |
| distribution_dz | number | – | – |
| end_frac | number | – | – |
| end_magnitude | number | – | – |
| kind | string | yes | – |
| load_case_id | number | – | – |
| magnitude | number | – | – |
| member | number | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| node | number | – | – |
| plate_element_id | number | – | – |
| polygon | string | – | – |
| position | number | – | – |
| projected | boolean | – | – |
| start_frac | number | – | – |
| surface_id | number | – | – |
No output schema declared.
No examples provided.
add_load_case ~182
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| model | string | – | – |
| model_ref | string | – | – |
| name | string | yes | – |
No output schema declared.
No examples provided.
add_load_combination ~299
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| check | string | – | – |
| factors | string | yes | – |
| limit_state | string | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| name | string | yes | – |
| situation | string | – | – |
No output schema declared.
No examples provided.
add_plate_grid_elements ~595
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| behavior | string | – | – |
| corner_points | string | yes | – |
| divisions_u | number | – | – |
| divisions_v | number | – | – |
| edge_support | string | – | – |
| first_element_id | number | – | – |
| local_x_direction | string | – | – |
| material_id | number | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| plane_state | string | – | – |
| theory | string | – | – |
| thickness | number | – | – |
No output schema declared.
No examples provided.
add_plate_opening ~568
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| boundary_node_ids | string | – | – |
| corner_points | string | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| opening_id | number | – | – |
| surface_id | number | – | – |
| target_size | number | – | – |
No output schema declared.
No examples provided.
add_plate_surface ~1,390
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| behavior | string | – | – |
| boundary_node_ids | string | – | – |
| classification | string | – | – |
| corner_points | string | – | – |
| divisions_u | number | – | – |
| divisions_v | number | – | – |
| edge_support | string | – | – |
| edge_support_id | number | – | – |
| element_shape | string | – | – |
| local_x_direction | string | – | – |
| material_id | number | – | – |
| mesh_method | string | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| name | string | – | – |
| offset | number | – | – |
| plane_state | string | – | – |
| stiffness_modifier_bending | number | – | – |
| stiffness_modifier_membrane | number | – | – |
| stiffness_modifier_shear | number | – | – |
| surface_id | number | – | – |
| target_size | number | – | – |
| theory | string | – | – |
| thickness | number | – | – |
No output schema declared.
No examples provided.
add_unity_check ~131
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| check | string | yes | – |
| model | string | – | – |
| model_ref | string | – | – |
No output schema declared.
No examples provided.
build_model ~1,965
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| default_section | string | – | – |
| load_combinations | string | – | – |
| loads | string | – | – |
| material | string | – | – |
| members | string | yes | – |
| nodes | string | yes | – |
| order | string | – | – |
| plane | string | – | – |
| project_name | string | – | – |
| sections | string | – | – |
| self_weight | boolean | – | – |
| supports | string | – | – |
No output schema declared.
No examples provided.
check_beam ~612
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| laterally_restrained | boolean | – | – |
| length | number | – | – |
| load_kN_per_m | number | – | – |
| material | string | – | – |
| point_load | number | – | – |
| point_position | number | – | – |
| restrained | boolean | – | – |
| section | string | yes | – |
| span | number | – | – |
| span_m | number | – | – |
| support | string | – | – |
| udl | number | – | – |
| uls_factor | number | – | – |
| uniform_load | number | – | – |
No output schema declared.
No examples provided.
create_beam ~591
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| height_mm | number | – | – |
| length | number | – | – |
| load | number | – | – |
| load_kn | number | – | – |
| load_position | number | – | – |
| load_position_frac | number | – | – |
| load_type | string | – | – |
| material | string | – | – |
| point_load | number | – | – |
| point_position | number | – | – |
| section | string | – | – |
| span | number | – | – |
| span_m | number | – | – |
| support | string | – | – |
| udl | number | – | – |
| uniform_load | number | – | – |
| width_mm | number | – | – |
No output schema declared.
No examples provided.
create_frame ~352
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| base | string | – | – |
| bay_width_m | number | – | – |
| bays | number | – | – |
| beam_height_mm | number | – | – |
| beam_width_mm | number | – | – |
| column_height_mm | number | – | – |
| column_width_mm | number | – | – |
| lateral_kn | number | – | – |
| material | string | – | – |
| roof_udl_kn_per_m | number | – | – |
| storey_height_m | number | – | – |
| storeys | number | – | – |
No output schema declared.
No examples provided.
create_section ~1,291
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| a_sy | number | – | – |
| a_sz | number | – | – |
| apply_to | string | – | – |
| area | number | – | – |
| b_mm | number | – | – |
| d_mm | number | – | – |
| ec3 | string | – | – |
| h_mm | number | – | – |
| i_w | number | – | – |
| i_y | number | – | – |
| i_z | number | – | – |
| j | number | – | – |
| library_name | string | – | – |
| material | string | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| name | string | yes | – |
| shape | string | – | – |
| t_mm | number | – | – |
| tf_mm | number | – | – |
| tw_mm | number | – | – |
| wel_y | number | – | – |
| wel_z | number | – | – |
| wpl_y | number | – | – |
| wpl_z | number | – | – |
No output schema declared.
No examples provided.
generate_load_combinations_ec0 ~358
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| actions | string | yes | – |
| include_favorable | boolean | – | – |
| include_sls | boolean | – | – |
| include_uls | boolean | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| replace_existing | boolean | – | – |
No output schema declared.
No examples provided.
get_check_schema ~60
No description provided.
Input schema present but exposes no named parameters.
No output schema declared.
No examples provided.
get_schema ~147
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| root | string | – | – |
No output schema declared.
No examples provided.
get_section ~116
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| name | string | yes | – |
No output schema declared.
No examples provided.
get_template ~51
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| name | string | yes | – |
No output schema declared.
No examples provided.
get_usage ~32
No description provided.
Input schema present but exposes no named parameters.
No output schema declared.
No examples provided.
list_materials ~55
No description provided.
Input schema present but exposes no named parameters.
No output schema declared.
No examples provided.
list_models ~24
No description provided.
Input schema present but exposes no named parameters.
No output schema declared.
No examples provided.
list_sections ~135
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| family | string | – | – |
No output schema declared.
No examples provided.
list_templates ~23
No description provided.
Input schema present but exposes no named parameters.
No output schema declared.
No examples provided.
load_model ~33
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| id | string | yes | – |
No output schema declared.
No examples provided.
render_report ~94
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| solved_model | string | yes | – |
No output schema declared.
No examples provided.
run_unity_checks ~357
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| detail | string | – | – |
| idempotency_key | string | – | – |
| include_report | boolean | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| result_filter | array | – | – |
No output schema declared.
No examples provided.
save_model ~104
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| description | string | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| name | string | yes | – |
No output schema declared.
No examples provided.
set_analysis ~636
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| buckling | string | – | – |
| clear | string | – | – |
| modal | string | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| options | string | – | – |
| seismic | string | – | – |
No output schema declared.
No examples provided.
set_member ~1,428
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| end_offset | string | – | – |
| end_release | string | – | – |
| keep_axial_slack | boolean | – | – |
| member_ids | string | yes | – |
| member_type | string | – | – |
| mirror | boolean | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| pretension | number | – | – |
| rotation_angle_deg | number | – | – |
| start_offset | string | – | – |
| start_release | string | – | – |
| unstretched_length | number | – | – |
No output schema declared.
No examples provided.
set_member_design ~744
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| buckling_length_t | number | – | – |
| buckling_length_y | number | – | – |
| buckling_length_z | number | – | – |
| buckling_restraints | string | – | – |
| chi | number | – | – |
| classification | string | – | – |
| effective_length_factor_y | number | – | – |
| effective_length_factor_z | number | – | – |
| ltb_length | number | – | – |
| member_set_ids | string | yes | – |
| model | string | – | – |
| model_ref | string | – | – |
| set_classification | string | – | – |
No output schema declared.
No examples provided.
set_scissor_hinge ~835
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| at_nodes | string | – | – |
| axes | string | – | – |
| clear | boolean | – | – |
| member_ids | string | – | – |
| member_set_id | number | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| releases | string | – | – |
| scissor_hinge_id | number | – | – |
No output schema declared.
No examples provided.
set_support ~1,323
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| RX | string | – | – |
| RX_stiffness | number | – | – |
| RY | string | – | – |
| RY_stiffness | number | – | – |
| RZ | string | – | – |
| RZ_stiffness | number | – | – |
| X | string | – | – |
| X_stiffness | number | – | – |
| Y | string | – | – |
| Y_stiffness | number | – | – |
| Z | string | – | – |
| Z_stiffness | number | – | – |
| classification | string | – | – |
| keep_axial_slack | boolean | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| node_ids | string | yes | – |
| preset | string | – | – |
| stiffness_curves | string | – | – |
| support_id | number | – | – |
| warping | string | – | – |
| warping_stiffness | number | – | – |
No output schema declared.
No examples provided.
solve_model ~362
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| detail | string | – | – |
| idempotency_key | string | – | – |
| include_report | boolean | – | – |
| model | string | – | – |
| model_ref | string | – | – |
| result_filter | array | – | – |
No output schema declared.
No examples provided.
stash_model ~151
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| model | string | yes | – |
| name | string | – | – |
No output schema declared.
No examples provided.
summarize_plate_results ~645
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| case_or_combination | string | – | – |
| quantities | string | – | – |
| results | string | yes | – |
| thickness | number | – | – |
| top_n | number | – | – |
| yield_stress | number | – | – |
No output schema declared.
No examples provided.
validate_model ~162
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| model | string | – | – |
| model_ref | string | – | – |
No output schema declared.
No examples provided.
How do I install the FERS — structural FEM MCP server?
FERS — structural FEM runs locally as an npm package, launched with npx -y @ferscloud/fers-mcp. Ready-made configuration for Claude, Cursor, VS Code, Codex and 5 more is on this page, copied from each client's own documentation.
npm · @ferscloud/fers-mcp
claude mcp add com-ferscloud-fers -- npx -y @ferscloud/fers-mcp
What is the FERS — structural FEM MCP server?
FERS — structural FEM is an MCP server listed in the public MCP registry as com.ferscloud/fers. Structural FEM for AI agents: frames, plates, buckling, seismic and Eurocode checks, solved locally. This page covers its npm package (@ferscloud/fers-mcp).
Is the FERS — structural FEM MCP server safe to use?
FERS — structural FEM scores 47 out of 100 on VerifyMCP. We found no known CVEs affecting it as of 5 November 2026. It declares no install or post-install scripts. That is a record of what we were able to check automatically, not an endorsement. The category breakdown on this page shows every signal behind the number, including the ones we could not confirm.
Is the FERS — structural FEM MCP server still maintained?
FERS — structural FEM is still listed as active in the MCP registry. We last reached this channel on 5 November 2026. Those dates come from our own scans of the registry and the channel itself, not from anything the publisher announced.
What did VerifyMCP test on the FERS — structural FEM MCP server?
VerifyMCP ran 10 checks on FERS — structural FEM, covering Malware scan, Known CVEs, Install scripts, Dependency health and 6 more. 4 items could not be completed, a gap on our side rather than a finding about FERS — structural FEM: License, Schema quality, Tool coverage and Tool safety. 3 categories score 0 for that reason, because we only credit what we can confirm. Endpoint Security and Transport & Reachability do not apply to an npm package, so they were not tested. The score does not measure everything, and the scoring documentation lists what it leaves out.