AnkusDrive
PYPI · ANKUSDRIVE
Drive FreeCAD from an agent: CAD modeling, drawings, FEM, CFD, EM, and multiphysics simulation.
Available components
Last scanned (5 hours ago)
Scores higher than 62% of PyPI servers
Category Developer Tools
How this component scores in each security and reliability category. Every signal is checked automatically from public evidence about the published package, including repeated runs of it in an isolated sandbox, and we only credit what we can confirm. How we score → Why this is hard to score →
Supply Chain Security100
- No malware found by supply-chain analysis.Pass
- No known CVEs affecting this package version or its production dependencies.Pass
- Runs setuptools.build_meta at install time, a recognised build step with no custom scripting around it. View diagnostics → Pass
- 0 of 30 dependencies flagged as unhealthy. View diagnostics → Pass
Provenance & Transparency100
- Source repository is publicly reachable at the declared URL. View diagnostics → Pass
- Cryptographically verified build provenance (signed, bound to gchen19/AnkusDrive). View diagnostics → Pass
- Clear OSI-approved license (Apache-2.0).Pass
- Actively maintained (last published 6 days ago).Pass
- Publishes a security disclosure policy (SECURITY.md).Pass
Schema Quality & AI Usability0
- Schema quality not yet verified: the captured schema was too large for us to store in full, or the server stopped listing its tools part-way, so we will not judge it on a partial copy.Unverified
Stability & Change Management77
- Stability observed for 23 of 30 days with no destabilising changes; credit accrues until the full window elapses.Partial
Tool Coverage0
- Tool coverage not yet verified: the captured tool definitions were too large for us to store in full, or the server stopped listing its tools part-way, so we will not judge them on a partial copy.Unverified
Tool Safety0
- Tool safety not yet verified: the captured tool definitions were too large for us to store in full (the trim removes the very descriptions this category reads), or the server stopped listing its tools part-way.Unverified
Capabilities100
- Implements a supported MCP spec version (2025-11-25); the latest is 2026-07-28.Pass
Unverified: 3 categories
Categories scored 0 because our sandbox has not given us the schema these checks need to read. That is a gap on our side rather than a finding about the package, and we only credit what we can confirm, so the score stands at 0 until the capture succeeds. We are working through the fleet, so this normally clears without any action from you. How we score packages →
Every change we have recorded for this component, newest first. Security-relevant changes are always shown. ▲ marks a change for the better, ▼ a change for the worse; unmarked changes are neutral.
- 5 Nov 26 −3
- Stability: pass → 0.77 functional
- 31 Oct 26 +15
- Malware scan: unverified → pass ▲ security
- 30 Oct 26 −15
- Malware scan: pass → unverified ▼ security
- Stability: 0.97 → pass security
- Package version: 0.5.6 → 0.5.7 functional
- 29 Oct 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 93 to 97. That category is still filling its 30-day observation window: 28 days of observed history at the previous scan, 29 at this one. The score rises as the window fills, whether or not the server changes.
- 27 Oct 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 87 to 90. That category is still filling its 30-day observation window: 26 days of observed history at the previous scan, 27 at this one. The score rises as the window fills, whether or not the server changes.
- 25 Oct 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 80 to 83. That category is still filling its 30-day observation window: 24 days of observed history at the previous scan, 25 at this one. The score rises as the window fills, whether or not the server changes.
- 23 Oct 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 73 to 77. That category is still filling its 30-day observation window: 22 days of observed history at the previous scan, 23 at this one. The score rises as the window fills, whether or not the server changes.
- 21 Oct 26 +1
No change was recorded against any check on this day. Stability & Change Management went from 67 to 70. That category is still filling its 30-day observation window: 20 days of observed history at the previous scan, 21 at this one. The score rises as the window fills, whether or not the server changes.
Diagnostic detail from the automated scan of this channel: what the scanner observed at each step, so you can see exactly where a check passed or failed. It is informational only and never changes the trust score.
Captured 5 Nov 2026 · Analysed pypi/ankusdrive@0.5.7
Provenance Verified
A signed build attestation was found and verified, binding this exact artifact to the source repository it claims to come from.
| Result | Verified |
|---|---|
| Ecosystem | pypi |
| Reason | Verified |
| Discovered via | Registry attestation endpoint |
| Source repo | gchen19/AnkusDrive |
| Certificate issuer | https://token.actions.githubusercontent.com |
| Certificate SAN | https://github.com/gchen19/AnkusDrive/.github/workflows/publish.yml@refs/tags/v0.5.7 |
| Rekor log index | 3579036604 |
| Predicate type | PyPI publish attestation https://docs.pypi.org/attestations/publish/v1 |
| Subject digest | sha256:aac806f3d8915cc0d34fb85cb3cf3c8a213aed51db164200d7fad1f4655e764c |
Background: How many MCP packages publish verified provenance →
Install scripts 1 script
| Hook | Tier | Command |
|---|---|---|
| build_backend | allowlisted | setuptools.build_meta |
Background: Why install scripts are a supply-chain risk →
Dependencies 30 packages
| Packages resolved | 30 |
|---|---|
| Tree resolution | Complete |
Background: SBOMs and build attestations, explained →
The tools this component advertises to a client, with an estimated token cost for each. Expand a tool to see its parameters and schema. The per-tool counts are indicative and are not scored directly; the schema's total context footprint is one signal in Schema Quality & AI Usability. A tool's description is untrusted text the model reads on every call, which is what makes this list a security surface and not just an inventory: how tool poisoning works →
feature_validate ~133
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| inputs | – | – | – |
| refs | – | – | – |
| template | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_add_constraint ~356
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| ambient_temp | – | – | – |
| analysis | string | yes | – |
| direction | – | – | – |
| emissivity | – | – | – |
| film_coef | – | – | – |
| flux | – | – | – |
| flux_type | – | – | – |
| force | – | – | – |
| kind | string | yes | – |
| name | – | – | – |
| pressure | – | – | – |
| refs | array | yes | – |
| reversed | boolean | – | – |
| temperature | – | – | – |
| workspace | string | – | – |
| x | – | – | – |
| x_free | – | – | – |
| y | – | – | – |
| y_free | – | – | – |
| z | – | – | – |
| z_free | – | – | – |
No output schema declared.
No examples provided.
fem_buckling ~74
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | string | yes | – |
| n_factors | integer | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_buckling_results ~86
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | – | – | – |
| job_id | – | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_cantilever_demo ~140
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| force | number | – | – |
| height | number | – | – |
| length | number | – | – |
| mesh_size | number | – | – |
| width | number | – | – |
| workdir | – | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_mesh ~236
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | string | yes | – |
| body | string | yes | – |
| char_length | number | – | – |
| element_order | – | – | – |
| min_length | – | – | – |
| name | string | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_mesh_refinement ~127
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| char_length | number | yes | – |
| mesh | string | yes | – |
| name | string | – | – |
| refs | array | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_modal ~102
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | string | yes | – |
| f_high | – | – | – |
| f_low | – | – | – |
| n_modes | integer | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_modal_results ~88
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | – | – | – |
| job_id | – | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_new_analysis ~44
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| name | string | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_result_probe ~353
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | – | – | – |
| face | – | – | – |
| field | string | – | – |
| handle | – | – | – |
| job_id | – | – | – |
| point | – | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_results ~119
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | – | – | – |
| job_id | – | – | – |
| top_n | integer | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_run ~258
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | string | yes | – |
| workdir | – | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_run_submit ~293
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | string | yes | – |
| workdir | – | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_set_material ~124
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | string | yes | – |
| body | string | yes | – |
| material | object | yes | – |
| name | string | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_set_nonlinear_material ~453
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | string | yes | – |
| base_material | string | yes | – |
| geometric_nonlinearity | boolean | – | – |
| hardening | string | – | – |
| max_plastic_strain | number | – | – |
| name | string | – | – |
| ramp_increments | integer | – | – |
| tangent_modulus_mpa | – | – | – |
| workspace | string | – | – |
| yield_mpa | – | – | – |
| yield_points | – | – | – |
No output schema declared.
No examples provided.
fem_set_solver ~129
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | string | yes | – |
| kind | string | – | – |
| name | string | – | – |
| tunables | – | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fem_thermal_results ~92
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| analysis | – | – | – |
| job_id | – | – | – |
| top_n | integer | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fillet_edges ~306
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| allow_partial | boolean | – | – |
| edges | array | yes | – |
| handle | string | yes | – |
| per_edge | boolean | – | – |
| radius | number | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fit_check ~114
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| hole | object | yes | – |
| shaft | object | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fit_class ~141
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| basic_size | number | yes | – |
| fit | string | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fit_page ~144
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| margin | number | – | – |
| page | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fluid_props ~264
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| P_Pa | number | – | – |
| T_K | number | yes | – |
| name | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fracture_check ~196
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| crack_len_mm | number | yes | – |
| fracture_toughness_mpa_sqrt_m | – | – | – |
| geometry_factor | number | – | – |
| material | string | – | – |
| stress_mpa | number | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fsi_channel_pressure ~261
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| gap_mm | number | yes | – |
| length_mm | number | yes | – |
| mu_pa_s | number | – | – |
| rho_kg_m3 | number | – | – |
| velocity_m_s | number | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fsi_interface_balance ~275
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| fluid_force_n | – | – | – |
| length_mm | number | yes | – |
| pressure_pa | number | yes | – |
| solid_reaction_n | – | – | – |
| width_mm | number | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
fsi_plate_deflection ~381
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| i_mm4 | – | – | – |
| length_mm | number | yes | – |
| material | – | – | – |
| pressure_pa | number | yes | – |
| support | string | – | – |
| thickness_mm | number | yes | – |
| width_mm | number | yes | – |
| workspace | string | – | – |
| youngs_gpa | – | – | – |
No output schema declared.
No examples provided.
fsi_pressure_plate_submit ~429
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| density_kg_m3 | number | – | – |
| end_time_s | number | – | – |
| inlet_velocity_m_s | number | – | – |
| max_iterations | integer | – | – |
| nu_m2_s | number | – | – |
| poisson | number | – | – |
| rho_kg_m3 | number | – | – |
| time_window_s | number | – | – |
| timeout | integer | – | – |
| workspace | string | – | – |
| youngs_pa | number | – | – |
No output schema declared.
No examples provided.
gdt_check ~172
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| actual | – | – | – |
| control | string | yes | – |
| datum_refs | – | – | – |
| mmc_bonus | number | – | – |
| offset | – | – | – |
| workspace | string | – | – |
| zone | number | yes | – |
No output schema declared.
No examples provided.
gear_rating ~216
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| allowable_bending_mpa | – | – | – |
| face_width_mm | number | yes | – |
| lewis_form_factor | – | – | – |
| material | string | – | – |
| module_mm | number | yes | – |
| pinion_speed_rpm | – | – | – |
| power_w | – | – | – |
| tangential_force_n | – | – | – |
| teeth | integer | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
get_interface ~79
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| handle | string | yes | – |
| name | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
get_object ~50
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| handle | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
granular_screen ~576
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| bulk_density_kg_m3 | – | – | – |
| coordination | – | – | – |
| flow1_kg_s | – | – | – |
| flow2_kg_s | – | – | – |
| friction_coeff | – | – | – |
| material | – | – | – |
| mu_high | – | – | – |
| mu_low | – | – | – |
| outlet1_m | – | – | – |
| outlet2_m | – | – | – |
| outlet_m | – | – | – |
| particle_d_m | – | – | – |
| problem | string | – | – |
| regime | string | – | – |
| repose_high_deg | – | – | – |
| repose_low_deg | – | – | – |
| saturation | number | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
grid_convergence ~511
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| assumed_order | number | – | – |
| cell_counts | – | – | – |
| cell_sizes | – | – | – |
| dimensions | integer | – | – |
| values | array | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
h_estimate ~410
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| beta_per_k | – | – | – |
| characteristic_mm | number | yes | – |
| emissivity | number | – | – |
| fluid | string | – | – |
| geometry | string | yes | – |
| k_w_mk | – | – | – |
| nu_m2_s | – | – | – |
| pr | – | – | – |
| t_ambient_c | number | – | – |
| t_surface_c | number | yes | – |
| velocity_m_s | number | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
harmonic_response ~325
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| damping_ratio | number | yes | – |
| frequency_hz | – | – | – |
| natural_frequency_hz | number | yes | – |
| static_deflection_mm | – | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
harmonic_response_submit ~476
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| case_dir | – | – | – |
| damping_ratio | number | – | – |
| density_kg_m3 | number | – | – |
| height_m | number | – | – |
| length_m | number | – | – |
| n_sweep | integer | – | – |
| nx | integer | – | – |
| ny | integer | – | – |
| poisson | number | – | – |
| sif | string | – | – |
| span_pct | number | – | – |
| traction_pa | number | – | – |
| workspace | string | – | – |
| youngs_pa | number | – | – |
No output schema declared.
No examples provided.
helix ~132
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| angle | number | – | – |
| height | number | – | – |
| name | string | – | – |
| pitch | number | – | – |
| radius | number | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
hertz_contact ~369
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| load_n | number | yes | – |
| material1 | – | – | – |
| material2 | – | – | – |
| poisson1 | – | – | – |
| poisson2 | – | – | – |
| radius2_mm | – | – | – |
| radius_mm | number | yes | – |
| workspace | string | – | – |
| youngs1_gpa | – | – | – |
| youngs2_gpa | – | – | – |
No output schema declared.
No examples provided.
hole ~506
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| cut_depth | – | – | – |
| cut_diameter | – | – | – |
| cut_type | string | – | – |
| depth | number | – | – |
| depth_type | string | – | – |
| diameter | number | – | – |
| direction | – | – | – |
| intended_for | – | – | – |
| model_thread | – | – | – |
| name | string | – | – |
| reversed | boolean | – | – |
| sketch | string | yes | – |
| strict | boolean | – | – |
| thread_size | – | – | – |
| thread_type | – | – | – |
| threaded | boolean | – | – |
| through | – | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
impact_dynamics_submit ~1,000
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| body | string | yes | – |
| char_length_mm | – | – | – |
| contact | string | – | – |
| contact_stiffness_mpa_mm | – | – | – |
| deceleration_limit_g | – | – | – |
| density_kg_m3 | – | – | – |
| direction | – | – | – |
| drop_height_mm | – | – | – |
| duration_s | – | – | – |
| gap_mm | – | – | – |
| gravity | boolean | – | – |
| material | – | – | – |
| max_time_step_s | – | – | – |
| method | string | – | – |
| plastic | boolean | – | – |
| poisson | – | – | – |
| samples | – | – | – |
| tangent_mpa | – | – | – |
| time_step_s | – | – | – |
| velocity_m_s | – | – | – |
| workspace | string | – | – |
| yield_mpa | – | – | – |
| youngs_mpa | – | – | – |
No output schema declared.
No examples provided.
inspection_plan ~217
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| page | string | yes | – |
| ratio | number | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
interface_align_check ~149
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| assembly | string | yes | – |
| pairs | array | yes | – |
| tol_mm | number | – | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
interference_check ~66
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| assembly | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
items_check_manifest ~105
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| manifest | string | yes | – |
| registry | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
items_new ~165
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| files | – | – | – |
| item | string | yes | – |
| metadata | – | – | – |
| registry | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
items_resolve ~107
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| item | string | yes | – |
| registry | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
items_validate ~153
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| registry | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
job_list ~131
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| workspace | string | – | – |
No output schema declared.
No examples provided.
job_result ~91
No description provided.
| Name | Type | Req | Description |
|---|---|---|---|
| discard | boolean | – | – |
| job_id | string | yes | – |
| workspace | string | – | – |
No output schema declared.
No examples provided.
How do I install the AnkusDrive MCP server?
AnkusDrive runs locally as a PyPI package, launched with uvx ankusdrive. Ready-made configuration for Claude, Cursor, VS Code, Codex and 5 more is on this page, copied from each client's own documentation.
pypi · ankusdrive
claude mcp add gchen19-ankusdrive -- uvx ankusdrive
What is the AnkusDrive MCP server?
AnkusDrive is an MCP server listed in the public MCP registry as io.github.gchen19/ankusdrive. Drive FreeCAD from an agent: CAD modeling, drawings, FEM, CFD, EM, and multiphysics simulation. This page covers its PyPI package (ankusdrive).
Is the AnkusDrive MCP server safe to use?
AnkusDrive scores 65 out of 100 on VerifyMCP. We found no known CVEs affecting it as of 5 November 2026. Its build provenance is signed and verified. That is a record of what we were able to check automatically, not an endorsement. The category breakdown on this page shows every signal behind the number, including the ones we could not confirm.
Is the AnkusDrive MCP server still maintained?
AnkusDrive is still listed as active in the MCP registry. We last reached this channel on 5 November 2026. Those dates come from our own scans of the registry and the channel itself, not from anything the publisher announced.
What licence is the AnkusDrive MCP server under?
AnkusDrive declares the Apache-2.0 licence, which is OSI-approved. That covers the source only, and says nothing about the cost of any service it calls.